The brand’s newest mod is the Vaporesso Gen 200. It is part of the popular GEN series of mods, which has released more than three different models over the past few years. The GEN S and GEN X, which came before the original GEN, were also high-powered, high-performance mods. The new GEN 200 is powered by two 18650 batteries and has a brand-new Vaporesso sub-ohm tank. The AXON chipset, which is always reliable, powers the itank’s high-power output of 220W.
What features do the Vaporesso vapes Gen 200 kit offer?
The Gen series of mods from Vaporesso have all gotten high marks for how well they work and look. The same goes for the new Gen 200. The mod has the same four-layered design on the outside, which makes it feel light and textured.
The device has a back plate that can be taken off so that the two 18650 batteries can be put in. The mod is easy to hold because its back is pockmarked, and its other surfaces are smooth. It also feels ergonomic because its edges are just a little bit curved.
The Gen 200 has a large 0.96″ TFT screen on its control panel (all-color). It has four buttons, including one on the side that fires the gun. At the bottom of the screen, there are also three buttons for making changes. Two are the up and down buttons, and the one in the middle is the selector.
Under the screen, there is also a USB-C port for charging. The 510-ring is in the middle of the top of the device.
Design of Vaporesso Gen 200
Everything about the device feels natural; just holding it in your hand tells you everything you need to know about it. The ergonomics are great because you only need one hand to hold the device and control the mod. Even though it has two 18650 batteries, the device is surprisingly light and strong. This is because the whole thing is made of zinc alloy.
The rubberized texture of the outside keeps it from slipping out of your hand. Its design gives you a unique tactile sensation, almost pleasant. Everything stays in place well. All the buttons are solid, and the power button is big and round, just like the other Gen models.
How Long Can It Keep Going?
It has a dual-18650 battery and depends on how much you are using, at what wattage or temperature, and on the resistance of the coils inside. Vaporesso pods mod and any other mod with an AXON chipset have several modes that save or extend battery life.
Only those modes aren’t available on the Gen 200. You can only choose between wattage mode, curve mode, bypass, and Pulse mode, which varies on wattage mode. Users can choose any of these vaping modes from the main screen and vape at up to 220W. But vaping well below that limit can extend your Vape battery life.
The mod also has pass through vaping, so you can still use it while it’s charging. Instead of using an external charger, the mod can charge itself for up to two hours. But it is much faster than other vape pods that don’t have USB-C charging ports like Vaporesso vapes Gen 200 has.
What’s New at the Vaporesso vapes Gen 200 iTank?
The Vaporesso iTank also came with the Target 200, the last Gen device. The iTank has a self-cleaning system that lets you eliminate any buildup or residue in the tank. The atomizer also has a bottom airflow control ring with three holes and an easy-to-use push-back top cap that makes refilling the tank quick and easy.
The whole tank is made of stainless steel, and the two coils that come with the Gen 200 kit can be used with it. There are also two pieces of glass in the kit that holds e-juice in the tank. With the extender piece, the tank can hold up to 8ml of e-liquid. The straight glass piece can hold up to 5ml of e-liquid.
The kit comes with two sub-ohm coil heads. It has coils that look like mesh and have resistances of 0.2ohms and 0.4ohms, respectively. The tank’s coils are easy to take out and put back in because they press into place. The 0.4ohm coil is meant to give a better taste and works best at 55W. For those big, beautiful clouds, the other coil is best used at 65W.
How to Get Started?
The Gen 200 works like many of the cars that came before it. It only takes five clicks to turn on or off the main power switch and three clicks to get to the other settings for vaping and the screen. The middle selector button makes it easier to move the device around.
You can switch between different outputs, like wattage, bypass, and curve mode, by pressing the selector button. The AXON chipset does not have a temperature control mode. But a few other modes give you more control and freedom. The selector button gives you access to the Settings and Vaping Info menu. And you can change the settings for your screen and see how many puffs you’ve taken.
It works well with high wattages. But the mod worked perfectly at the settings recommended for the coils that came with it. The device is small and easy to use, especially if you have already used a Vaporesso device. The taste that coils make is great. The tank has a good way of controlling airflow so you can get intense vape flavours and big clouds.
Geekvape Aegis L200
Geek Vape L200 Aegis is the successor to the first generation of Geekvape mods. Back then, they were known for being almost impossible to break. The IP68-rated water resistance of the Aegis L200 keeps up this tradition. But it’s lighter than the models that came before it. The L200 has a sturdy body and is powered by two 18650 batteries. It can put out 200W. It also comes with a new sub-ohm tank from Geekvape. It can hold 5.5ml e-juice and has two sub-ohm coil heads from 0.2ohms to 0.25ohms.
What is in the Box?
The iTank is part of the kit that comes with the mod. It also has other important parts that help it work well.
- 1 x Vaporesso Gen 200 mod
- 1 x Vaporesso iTank (8 mL)
- 1 x Vaporesso GTi 0.2-ohm replacement vape pods coil (60-75W)
- 1 x Vaporesso GTi 0.4-ohm replacement vape pods coil (50-60W)
- 1 x Extra glass tube
- 3 x O-ring
- 1 x Type-C cable
- 1 x User manual
- 1 warranty card
The Vaporesso vapes Gen 200 is a device with a powerful output, an easy-to-use menu, many different vaping outputs, and a tank great for sub-ohm vaping. The device looks great on the outside. And the material it is made of makes it very easy to hold and use. The mod is also nice to look at because it comes in different colours with stylish details, and its ergonomic design makes it a pleasure to vape. you can check the Vape price in Pakistan and a replacement vape pods coil, at our website.